濟南電纜橋架對剛度的4點要求

Four Requirements for Rigidity of Jinan Cable Bridge Frame

濟南電纜橋架在我們的生活中是比擬罕見的，可以分爲槽式、托盤式和梯架式、網格式等構造，由支架、托臂和裝置附件等組成，具有構造復雜、造型美觀、配置靈敏和維修方便等特點，那麼電纜橋架對剛度有什麼樣的要求呢?接上去，中道開程就帶大家理解一下。

Jinan cable bridge is comparatively rare in our life. It can be divided into trough type, tray type, ladder type, grid type and other structures. It is composed of brackets, brackets and accessories. It has the characteristics of complex structure, beautiful appearance, sensitive configuration and convenient maintenance. What is the stiffness requirement of cable bridge? Next, the middle way will take you to understand.

1、濟南電纜橋架的熱浸鍍鋅防腐處置的技術質量，應契合規則。

1. The technical quality of hot dip galvanizing and anti-corrosion treatment of Jinan cable bridge should conform to the rules.

2、電纜橋架的承載程度，要依照荷載實驗的要求停止檢驗，可以使得電纜橋架剛開端變成永世變形時的荷載與平安系數相除的的大小不要比額外均布荷載小。

2. The load-bearing degree of cable bridge should be checked according to the requirement of load experiment, so that the difference between load and safety factor is not smaller than the additional uniform load when the rigid beginning of cable bridge becomes permanent deformation.

3、各種電纜橋架型式支、吊架，應能接受托盤、梯架相應規格、層數的額外均布荷載及其自重。

3. Supports and hangers of various types of cable bridges should be able to accept the additional uniform load and self-weight of the corresponding specifications and layers of pallets and ladders.

4、銜接板、銜接螺栓等受力附件，應與托盤、梯架、托臂等本體構造強度相順應，而且生托盤、梯架在接受額外均布荷載時的撓度不應大于1/200。

4. Connecting plate, connecting bolt and other mechanical accessories should conform to the structural strength of the body such as pallet, ladder and bracket, and the absolute deflection of raw pallet and ladder should not be greater than 1/200 when accepting additional uniform load.

5、濟南電纜橋架的吊架橫檔或側壁同定的托臂在接受托盤、梯架額外荷載時的較大撓度值與其長度之比，不應大于1/100。

5. The ratio of the larger deflection of the suspension bracket of Jinan cable bridge with the same side wall to the length of the bracket should not be greater than 1/100 when accepting the additional load of the tray and ladder.

6、工廠要有各類型式規格的托盤、電纜橋架梯架的不同跨距與允許均布荷載的關系曲線或數據表，且托盤、梯架在接受額外均布荷載時的撓度不要比兩百分之一小。

6. The factory should have curves or data tables of the relationship between the different spans of pallets of various types and specifications and the allowable uniform loads, and the absolute deflection of pallets and ladders should not be less than 2% when accepting additional uniform loads.

除此之外，對鍍鋅鎳介金等防腐處置的濟南電纜橋架，一定要停止實驗，得出驗證后果才可停止運用，而且還要有清楚的技術目標和檢測辦法。

In addition, the anti-corrosion treatment of Jinan cable bridge, such as galvanized nickel and gold, must stop the experiment and get the result of verification before it can stop using, but also have clear technical objectives and detection methods.

綜上所述有濟南航豐實業有限公司提供，想了解更多山東電纜橋架知識，歡迎關注我們的網站：http://m.offroader.com.cn謝謝支持！

In summary, all the above-mentioned Jinan Hangfeng Industrial Co., Ltd. provides, want to know more about Shandong cable bridge, welcome to pay attention to our website: http://m.offroader.com.cn Thank you for your support!